The Lamp projector, as previously stated, is generated from the projector's lamp system, which contains the components connected to the lamp. Users should monitor the light cycle and seek assistance from projector centers to check for issues.
You can also unscrew the lamp cap to determine whether the projector's bulb is acting strangely. Remember that the bulb will have a power connector to the projector, so turn it off before disassembling.
The red light flashing twice in a row is an error warning that the lamp cap is not closed. You can remove and reinstall the lamp cover of the projector, making sure the screws are secure.
The red lamp flashing four times indicates that the projector lamp is heated due to a faulty cooling system. If the projector light overheats owing to high temperatures, the bulb will explode or the projector will shut off automatically.
The bulb blinking red six times in a row indicates a fault with the projector's power source. In this case, you must turn off the projector and bring it to the center for a professional inspection.
Because projector bulbs are among the most expensive components, users must store and use the projector with caution to avoid mistakes related to projector bulbs. Routine projector maintenance is the most effective horse room alternative.
If the environment is dusty, such as in schools or cafes, projector maintenance should be performed once a year after 6 months of use. Projector maintenance is a relatively low-cost job that serves to extend the life of the projector bulb in particular and the projector equipment in general.
The following are some quick suggestions on projector lamp error status from Best Projector Guide. You can use the above check forms if your projector has the above error. Contact the supplier or manufacturer for assistance if your projector is still under warranty.